GLASS GLASS Installations and Repairs in Dallas Texas
 

 

 

 GLASS

                           FREE ESTIMATES  972-557-2655

 

                               COMPLETE LINE OF GLASS

                             & CUSTOM GLASS PRODUCTS

                     ABACA GLASS & MIRROR

                            Installs - Delivers - and Services the Dallas Texas Area

                              Glass Repairs - Insulated Fogged Unit Replacements

 

WINDOW GLASS  -  Cut to Size

     1/16"  - Kitchen Cabinet Doors - Picture Frames - Insulated Units -

                   Clear     Bronze     Gray     Green

       1/8"  - Larger Sized Windows - Very Light Load Shelves - Some Tempered Doors

                   Clear     Bronze     Gray     Green     Obscure     Pattern Designs

 

PLATE GLASS  -  Cut to Size

     3/16"  - Standard Tempered Doors - Light Load Shelves - Picture Windows

                   Enclosed Patio Enclosures - Framed Shower Door Replacements

                   Clear     Bronze     Gray     Obscure     Pattern Designs

       1/4"  - Coffee Table Tops - Desk Tops - Store Fronts - Shelves - Aquariums

                   Semi Frameless Shower Door Replacements - Coffee Tables and End Tables

                   Clear     Bronze     Gray     Obscure     Low E   PP2     Solar Green     Patterns

 

HEAVY GLASS  -  Cut to Size

        3/8" - Mall Store Fronts - Dining Tables - Shelving - Frameless Showers

                   Clear     Patterns

        1/2" - Stand Alone Tables and Desk - Room Partitions

                   Clear

        5/8" - Load Bearing Shelves

                   Clear

        3/4" - Railings - Counter Tops - Kitchen Counter Tops

                   Clear

 

TEMPERED SAFETY GLASS

        1/8" to 1/2" Glass can be tempered.

Tempered glass is not shatterproof nor unbreakable.

It is cut to size then heat treated in ovens to create a

much stronger glass than annealed or non-tempered glass.

The Safety Factor is that when tempered glass breaks,

it falls in thousands of little 1/4" pieces, instead of coming down

in big pieces that is much like a guillotine and could cause severe lacerations.

Used in automobile side and rear windows

and by Federal Law it is installed in and within 48" of any entrance door.

We cut the glass that you need to fit to the exact size required for installing,

then it is run through the ovens to be tempered within 48 hours. 

 

Once it has been tempered, there is no way to cut it to another size.

LAMINATED GLASS

     3/16" and 1/4"

Laminated Glass is made by adhering two pieces of glass together

with a piece of polyvinyl between them making a much stronger single piece

of glass that is harder to penetrate.  Once it is broken, it stays in place being

held by the polyvinyl. 

Used in car windshields and storefront doors.

Can be cut in patterns and comes in different tints. Clear  Bronze  Gray  Green

 

EDGES

     3/8" and up to 3/4"

ABACA GLASS offers a variety of edge work.

 

Cut glass with sharp edges is called RAW.

 

The most common edge work is SEAMED. 

This is sanding the top and bottom edges

eliminating the sharp edges for easy handling.

 

The second most common edge work is FLAT GROUND. 

This is sanding the top and bottom edges

and FLAT GROUNDING the flat side of the edge.

This removes the shiner from the edge

and is an economical finish for table and desk tops.

 

From there, you move into the POLISHED edgework

as seen in the pictures to the right. 

Most of this type of edgework is used on heavy glass.

3/8" up to 3/4" thick.  Fine finishes for that end product

you want to see on your Dining Table or Conference Table.

 

CUT TO SIZE

From the 5"x7" picture frame

to the very large storefront plate glass.

If you need it bigger than you can carry,

we do have the glass racks on our trucks

to deliver the glass you need here in the North Texas Area.

              Call or Email Us for Prices and Quotes for All Your Glass Needs

 

 

Glass is more than just "a pane to look through".

It comes in many different forms and has even more by-products.

 

Here at ABACA GLASS & MIRROR

we handle most Flat Glass Products which

come in all sizes, colors, shapes, textures and thickness up to 3/4". 

 

We can cut it to your specifications or customize it to fit your need. 

 

If you are shopping for any of Our Products in our On Line Catalog,

your needs can be met through our Shipping and Handling Department.

 

ABACA GLASS & MIRROR still offers FREE ESTIMATES.

 

If you have any questions about GLASS that you can not find the

answer to on our site, we would be more than happy to help

by Email or Telephone (972) 557-2655

 

dallas - mirror glass-glass showers-glass door

glass replacement-insulated units-insulated fogged units

fogged units-shower stalls-shower replacement

steam shower-custom showers-wholesale-solar screen-sneeze bar

shoponline-the doors-door repair-window repair-window replacement

window in dallas-vestibules-etchings-lexguard-bullet resistant-bullet proof

patio doors-engraving-enclosed porches-enclosed patios-end tables

coffee tables-custom etched-cutting-cracked-custom cuts-triple pencil

ogee-beveled edge-pemcil polish-conference tables-entrance doors

Kitchen Coutner Tops-Glass Services-Glass Services-pemcil polish

 

Home  *  Contact Us  *  Terms  *  Privacy Statement  *

Send Mail to Webmaster concerning Questions or Comments about this web site.

Copyright ©Abaca Glass and Mirror 1996-2006, all rights reserved except as permitted under the U.S.Copyright act of 1976.

No part of this web site may be reproduced or distributed in any form or by any other means, nor may be stored in a database

or electronic retrieval system without the prior written consent of Abaca Glass and Mirror.