|
FREE ESTIMATES
972-557-2655
COMPLETE LINE OF GLASS
&
CUSTOM GLASS PRODUCTS
ABACA
GLASS & MIRROR
Installs -
Delivers - and Services the Dallas Texas Area
Glass
Repairs - Insulated Fogged Unit Replacements
WINDOW GLASS - Cut to Size
1/16"
-
Kitchen Cabinet Doors -
Picture Frames -
Insulated Units -
Clear
Bronze Gray Green
1/8"
- Larger Sized Windows - Very Light Load Shelves
- Some Tempered Doors
Clear
Bronze Gray Green Obscure
Pattern
Designs
PLATE GLASS - Cut to Size
3/16"
-
Standard Tempered Doors
- Light Load Shelves - Picture Windows
Enclosed Patio
Enclosures - Framed Shower Door Replacements
Clear
Bronze Gray Obscure
Pattern
Designs
1/4"
- Coffee Table Tops - Desk Tops -
Store Fronts
- Shelves - Aquariums
Semi Frameless
Shower Door Replacements - Coffee Tables and End Tables
Clear
Bronze Gray Obscure Low E PP2 Solar Green
Patterns
HEAVY GLASS - Cut to Size
3/8"
- Mall Store Fronts - Dining Tables - Shelving -
Frameless Showers
Clear
Patterns
1/2"
- Stand Alone Tables and Desk - Room Partitions
Clear
5/8"
- Load Bearing Shelves
Clear
3/4"
- Railings - Counter Tops - Kitchen Counter Tops
Clear
TEMPERED SAFETY GLASS
1/8"
to 1/2" Glass can be
tempered.
Tempered glass is not shatterproof nor
unbreakable.
It is cut to size then heat treated in ovens
to create a
much stronger glass than annealed or
non-tempered glass.
The Safety Factor is that when tempered glass
breaks,
it falls in thousands of little 1/4" pieces,
instead of coming down
in big pieces that is much like a guillotine
and could cause severe lacerations.
Used in automobile side and rear windows
and by Federal Law it is installed in and
within 48" of any entrance door.
We cut the glass that you need to fit to the
exact size required for installing,
then it is run through the ovens to be
tempered within 48 hours.
Once it has been tempered, there is no way to
cut it to another size.
LAMINATED
GLASS
3/16" and
1/4"
Laminated Glass is made by adhering two
pieces of glass together
with a piece of polyvinyl between them making
a much stronger single piece
of glass that is harder to penetrate. Once
it is broken, it stays in place being
held by the polyvinyl.
Used in car windshields and storefront doors.
Can be cut in patterns and comes in different
tints. Clear Bronze Gray Green
EDGES
3/8" and up to
3/4"
ABACA GLASS offers a variety of edge work.
Cut glass with sharp edges is called RAW.
The most common edge work is SEAMED.
This is sanding the top and bottom edges
eliminating the sharp edges for easy
handling.
The second most common edge work is FLAT
GROUND.
This is sanding the top and bottom edges
and FLAT GROUNDING the flat side of the edge.
This removes the shiner from the edge
and is an economical finish for table and
desk tops.
From there, you move into the POLISHED
edgework
Most of this type of edgework is used on
heavy glass.
3/8" up to 3/4" thick. Fine finishes for
that end product
you want to see on your Dining Table or
Conference Table.
CUT TO SIZE
From the 5"x7" picture frame
to the very large storefront plate glass.
If you need it bigger than you can carry,
we do have the glass racks on our trucks
to deliver the glass you need here in the
North Texas Area.
Call or
Email Us
for Prices and Quotes for All Your Glass Needs
Glass is more than just "a pane to
look through".
It comes in many different forms and
has even more by-products.
Here at ABACA GLASS & MIRROR
COMPANY
We handle most
Flat Glass Products
which
come in all sizes, colors, shapes,
textures and thickness up to 3/4".
We can cut it to your specifications
or customize it to fit your need.
If you are shopping for any of Our
Products in our
On Line Catalog,
your needs can be met through our
Shipping and Handling Department.
ABACA GLASS & MIRROR COMPANY
still offers
FREE ESTIMATES.
If you have any questions about
GLASS that you can not find the
answer to on our site, we would be
more than happy to help
by
Email
or Telephone (972) 557-2655 |